icon

低浓水力碎浆机

描述: 高中、低浓水力碎浆机用于制浆造纸行业废纸脱墨生产线中在迅速碎解废纸、浆板、损纸,且尽量的保护了纤维原有的性质。当加入化学药品时,可是油墨粒子和杂质与纤维分离,从而利用废纸生产出较高白度的浆料。具有生产

服务热线咨询 0536-6065123
产品详情

高中、低浓水力碎浆机用于制浆造纸行业废纸脱墨生产线中在迅速碎解废纸、浆板、损纸,且尽量的保护了纤维原有的性质。当加入化学药品时,可是油墨粒子和杂质与纤维分离,从而利用废纸生产出较高白度的浆料。具有生产能力大、碎解效果好、节约蒸汽药品、使用维修方便等优点。主要规格:1m³、2m³、3m³、5m³、8m³、10m³、12m³、15m³、20m³、25m³、30m
1、高浓碎浆机转子具有碎浆浓度高(约比传统高浓碎浆机高出3个百分点);用于废纸脱墨浆的处理可大大降低浆料加热能耗和化学药品的消耗量,疏解作用强,促使油墨粒子从纤维上更快地剥离和分散;而且对单根纤维几乎没有切断作用;对杂质的破坏作用小等优点。
2、放料稀释装置能使高浓浆料无须在碎浆机筒体内稀释而直接放料,大大缩短高浓浆料的放料时间,降低设备动力,节约电耗,特别适合后道工序对高浓度浆料的需求。

 

High, medium and low concentration hydraulic pulpers are used in deinking production line of waste paper in pulp and paper industry. They have advantages in quickly crushing waste paper, pulpboard and paper loss, and protecting the original properties of fibers as far as possible. When chemicals are added, the ink particles and impurities can be separated from the fibers, and the pulp with high whiteness can be produced from waste paper. It has the advantages of large production capacity, good crushing effect, saving steam drugs, convenient use and maintenance, etc. Main specifications: 1m³, 2m³, 3m³, 5m³, 8m³, 10m³, 12m³, 15m³, 20m³, 25m³, 30m³.

1. The rotor of high consistency pulper has high pulp concentration (about 3 percentage points higher than traditional high consistency pulper). When used in the treatment of deinked pulp from waste paper, the energy consumption of pulp heating and the consumption of chemicals can be greatly reduced, the effect of dissolution is strong, the ink particles can be peeled and dispersed from the fibers faster. It has the advantages of almost no cutting off effect to a single fiber and little damage to impurities.

2. The discharging dilution device can make the high consistency pulp discharged directly without dilution in the crusher barrel, greatly shorten the discharging time of the high consistency pulp, reduce the power of the equipment and save the power consumption, which is especially suitable for the demand of the high consistency pulp in the later process.